Split SSH implements a concept similar to having a smart card with your private SSH keys, except that the role of the “smart card” is played by another Qubes AppVM. This Qubes setup allows you to keep your SSH private keys in a vault VM (vault) while using an SSH Client VM (ssh-client) to access your remote server. This is done by using Qubes's qrexec framework to connect a local SSH Agent socket from your SSH Client VM to the SSH Agent socket within the vault VM. This way the compromise of the domain you use to connect to your remote server does not allow the attacker to automatically also steal all your keys. (We should make a rather obvious comment here that the so-often-used passphrases on private keys are pretty meaningless because the attacker can easily set up a simple backdoor which would wait until the user enters the passphrase and steal the key then.)
In the setup described in this guide, even an attacker who manages to gain access to the ssh-client VM will not be able to obtain the user’s private key since it is simply not there. Rather, the private key remains in the vault VM, which is extremely unlikely to be compromised if nothing is ever copied or transferred into it. In order to gain access to the vault VM, the attacker would require the use of, e.g., a general Xen VM escape exploit or a signed, compromised package which is already installed in the TemplateVM upon which the vault VM is based.
vault and ssh-client AppVMs.vault AppVM and set up automatic key adding prompt.Make sure the templates you plan to base your AppVMs on are up-to-date.
If you’ve installed Qubes OS using the default options, a few qubes including a vault AppVM has been created for you. Skip the first step if you don't wish to create another vault.
Create a new vault AppVM (vault) based on your chosen template. Set networking to (none).
Create a SSH Client AppVM (ssh-client). This VM will be used to make SSH connections to your remote machine.
Install ssh-askpass in the template of your vault VM. It will be used by ssh-agent to ask for confirmation, for keys added using ssh-add -c.
For Fedora templates:
sudo dnf install openssh-askpass
For Debian templates:
sudo apt-get install ssh-askpass-gnome
Perform the next steps in the AppVM vault.
Generate an SSH key pair. Skip this step if you already have your keys. Note that it is okay to not enter a password for your private keys since the vault AppVM has no networking. If you still want to encrypt your keys you must refer to the Securing Your Private Key section.
[user@vault ~]$ ssh-keygen -t ed25519 -a 500
Generating public/private ed25519 key pair.
Enter file in which to save the key (/home/user/.ssh/id_ed25519):
Created directory '/home/user/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/user/.ssh/id_ed25519
Your public key has been saved in /home/user/.ssh/id_ed25519.pub
The key fingerprint is:
SHA256:DBxSxZcp16d1NSVSid3m8HRipUDM2INghQ4Sx3jPEDo user@vault
The key's randomart image is:
+--[ED25519 256]--+
| o==+++.@++o=*|
| o==o+ B BoOoB|
| Eoo* + *.O.|
| . o+ . o|
| S |
| |
| |
| |
| |
+----[SHA256]-----+
-t: type
-a: num_trials
Please note that the key fingerprint and the randomart image will differ.
For more information about ssh-keygen, run man ssh-keygen.
Notice: Skip the following steps if you plan on using KeePassXC.
Make a new directory ~/.config/autostart
mkdir -p ~/.config/autostart
Create the file ~/.config/autostart/ssh-add.desktop
geditgedit ~/.config/autostart/ssh-add.desktop
[Desktop Entry]
Name=ssh-add
Exec=ssh-add -c
Type=Application
Note: If you've specified a custom name for your key using -f, you should adjust Exec=ssh-add to Exec=ssh-add <path-to-your-key-file>.
dom0:To control which VM is allowed as a client, which may act as the server and how we want this interaction to happen, we have to write a policy file for qrexec in dom0.
Create and edit /etc/qubes/policy.d/50-ssh.policy.
nano.sudo nano /etc/qubes/policy.d/50-ssh.policy
qubes.SshAgent * ssh-client vault ask target=vault
ssh-client or a vault, add the following line:qubes.SshAgent * @anyvm @anyvm ask
vault VM, append target=vault so it looks like for example:shell_prompt
qubes.SshAgent * @anyvm @anyvm ask target=vault
Create and edit /etc/qubes-rpc/policy/qubes.SshAgent.
nano.sudo nano /etc/qubes-rpc/policy/qubes.SshAgent
ssh-client vault ask
ssh-client or a vault, add the following line:@anyvm @anyvm ask
vault VM, append default_target=vault so it looks like for example:@anyvm @anyvm ask,default_target=vault
Note: There are many ways to fine-tune this policy. For more details see the Qubes qrexec documentation.
vault:We now need to write a small script that handles connection requests from ssh-client and forwards them to the SSH agent in your vault. As we are using qrexec as communication method we have to place it in a special location and have to name it just as the policy file we just created in dom0.
Create and edit /etc/qubes-rpc/qubes.SshAgent.
geditsudo gedit /etc/qubes-rpc/qubes.SshAgent
#!/bin/sh
# Qubes App Split SSH Script
# safeguard - Qubes notification bubble for each ssh request
notify-send "[$(qubesdb-read /name)] SSH agent access from: $QREXEC_REMOTE_DOMAIN"
# SSH connection
socat - "UNIX-CONNECT:$SSH_AUTH_SOCK"
Make it executable
sudo chmod +x /etc/qubes-rpc/qubes.SshAgent
ssh-clientTheoretically, you can use SSH in any AppVM. However, if you are considering split-SSH as an additional security layer it is probably reasonable to also think about which VMs you will be using SSH in. For instance, you might want a dedicated admin domain for these purposes. Depending on how many systems you plan to access and where they are located, it could also be preferable to have different VMs with different firewall rules for Intranet and Internet administration.
We want to make sure that our ssh-client is prepared to use split-ssh right after the VM has started. Therefore, we add a script in rc.local (Which will run at VM startup) to listen for responses from vault and make SSH use this connection by modifying the user’s .bashrc.
Edit /rw/config/rc.local.
gedit.sudo gedit /rw/config/rc.local
# SPLIT SSH CONFIGURATION >>>
# replace "vault" with your AppVM name which stores the ssh private key(s)
SSH_VAULT_VM="vault"
if [ "$SSH_VAULT_VM" != "" ]; then
export SSH_SOCK="/home/user/.SSH_AGENT_$SSH_VAULT_VM"
rm -f "$SSH_SOCK"
sudo -u user /bin/sh -c "umask 177 && exec socat 'UNIX-LISTEN:$SSH_SOCK,fork' 'EXEC:qrexec-client-vm $SSH_VAULT_VM qubes.SshAgent'" &
fi
# <<< SPLIT SSH CONFIGURATION
Edit ~/.bashrc and add the following to the bottom of the file:
geditgedit ~/.bashrc
# SPLIT SSH CONFIGURATION >>>
# replace "vault" with your AppVM name which stores the ssh private key(s)
SSH_VAULT_VM="vault"
if [ "$SSH_VAULT_VM" != "" ]; then
export SSH_AUTH_SOCK="/home/user/.SSH_AGENT_$SSH_VAULT_VM"
fi
# <<< SPLIT SSH CONFIGURATION
Although passwords wouldn't protect you against a full system compromise (attacker could place a keylogger), it's possible for an adversary to gain read-only access to some of your files (e.g., file shares or offline backups of data). This becomes even more likely if you plan to also use your data outside of Qubes and not be able to modify anything. Passwords are advisable for mitigating these threats .
You can either use the built-in password utility of your private key combined with a graphical prompt or prefer to use KeePassXC. Please note that since ssh-askpass prompt is displayed on vault VM boot, it is not possible to use both configurations simultaneously.
ssh-askpassYou should have added ssh-askpass to your vault template earlier when setting up SSH.
Either add a password to an existing private key with ssh-keygen -p or directly create a key pair with a password (enter password when prompted during the creation process, see above). Note that the location and name of your private key may differ.
[user@vault ~]$ ssh-keygen -p
Enter file in which the key is (/home/user/.ssh/id_rsa): /home/user/.ssh/id_ed25519
Key has comment 'user@vault'
Enter new passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved with the new passphrase.
Shutdown the template and restart your vault VM.
With this configuration you'll be prompted for entering your password every time you start your vault VM to be able to make use of your SSH key.
Note: This part is for setting up KeePassXC, not KeePassX or KeePass. See the KeePassXC FAQ.
KeePassXC should be installed by default in both Fedora and Debian TemplateVMs. If it’s not or you're using another template, you can install it manually.
A note on managing your Qubes domains: You might already be using KeePassXC to store your passwords. This guide explains how to set up a new KeePass database and use it exclusively for SSH keys. However, it is also possible to mix your passwords and SSH keys in one big database. Others might have dedicated databases for different kinds of passwords, potentially even in different vault VMs. There is no right or wrong here. Feel free to skip the first five steps if you want to use an existing database.
Add KeepasXC to the Applications menu of the newly created AppVM for ease of access and launch it.
Note: Since the vault VM has no internet connection, you can safely deny automatic updates if prompted.
Create a new database.
Enter a name for your database and continue.
Adjust the encryption settings. Check the KeePassXC User Guide for more information about these settings.
Enter a password for your database. Take your time make a secure but also rememberable password. (hint)
Add a new entry.
Set password to your SSH key passphrase.
Go into the Advanced section and add your keys.
Note: Technically, you only need to add the private key (id_25519) for the following steps to work. If you add the public key here, too, you can later on backup your kdbx file and have everything in one place. You can even delete your keys (id_25519 and id_25519.pub) from your file system if you like.
Enable "SSH Agent Integration" within the Application Settings.
Restart KeePassXC
Check the SSH Agent Integration status.
Open the entry you created and select your private key in the "SSH Agent" section. Don't forget to also check the first two options.
Close your KeePassXC database and run ssh-add -L in a vault VM terminal. It should return The agent has no identities.
[user@vault ~]$ ssh-add -L
The agent has no identities.
Unlock your KeePassXC database and run ssh-add -L again. This time it should return your public key.
[user@vault ~]$ ssh-add -L
ssh-ed25519 <public key string> user@vault-keepassxc
If you're using KeePassXC, shutdown KeePassXC on your vault VM. If not, make sure your private key is not added to the ssh-agent in your vault VM (Check with ssh-add -L). If it is, restart your vault VM and do not enter your password when it asks you to.
Try fetching your identities on the SSH Client VM.
ssh-add -L
Allow operation execution. (If you don't see the below prompt, check your VM interconnection setup.)
It should return The agent has no identities..
If you're getting an error (e.g. error fetching identities: communication with agent failed), make sure your vault VM is running and check your VM interconnection setup.
Launch KeePassXC and unlock your database.
Repeat steps 1 and 2.
Check if it returns ssh-ed25519 <public key string>
If you're getting an error (e.g. error fetching identities: communication with agent failed), make sure your vault VM is running and check your VM interconnection setup.
ssh-add -c as described aboveWant more Qubes split magic? Check out Split-GPG.
This guide has been inspired by:
Qubes Split SSH (Github: Jason Hennessey - henn) https://github.com/henn/qubes-app-split-ssh
Using split ssh in QubesOS 4.0 (Kushal Das) https://kushaldas.in/posts/using-split-ssh-in-qubesos-4-0.html
Using Split-SSH in Qubes 4 (Denis Zanin) https://deniszanin.com/using-split-ssh-gpg-in-qubes-os/
R.I.S.K.S. https://19hundreds.github.io/risks-workflow/ssh-split-setup