Continuing the discussion from How do I create a standalone VM?:

> Please note: This is not the standard method of installing software in Qubes. Only use this when you've exhausted all other options, if at all.

⚠️ Security disclaimers

In this guide multiple sacrifices are made for convenience. Make sure you understand their implications and proceed only if these are acceptable for your particular situation. These include: * Not verifying software signatures (due to their unavailability) When you install software in the regular way (from the repos) that is done automatically for you. However with this method you have to verify software manually. However many times this is not available, so you cannot confirm the authenticity of the software.

• Lack of updates By installing software from .deb or .rpm packages manually, the applications require manual updates. It is extremely likely the user will forget to update them and thus run the risk of running software with known security vulnerabilities

But please do keep in mind that even with these security sacrifices it is still safer for you to run these programs on Qubes than running them on regular systems (regarding the isolation it can provide to other qubes).

Introduction

All I'm writing here can be found on the documentation with a bit of digging and experimentation. But I'm writing it here as I couldn't find a consolidated guide on how to install this.

This guide is way more extensive than it would need to be, but the goal here is to be didactic. Hopefully as you follow it you end up understanding a few things that can help you use Qubes more independently.

We'll be following the installation of the "LocalWP" proprietary software. But you can follow this with any other piece of software available for linux as a .deb or .rpm package.

1. Download software

We first go to the download page for the software, in this case https://localwp.com/releases/. On the download page we should find either a .deb, an .rpm or both. Each qube can run a different operating system -- some run Debian, some Fedora and others run something else. But the file you download will condition which one you have to choose (and keep this choice on the back of your mind).

• .rpm -> fedora If you choose a .rpm then the rest of the instructions will be done on a Fedora-based StandaloneVM

• .deb -> debian If you choose a .deb then the rest of the instructions will be done on a Debian-based StandaloneVM

You can download this in any of your qubes. Later you'll move it to the qube where you'll install it.

2. Create a StandaloneVM

We will be installing it as a StandaloneVM for convenience. You typically do it this way when you want to install some software that you will only use in one virtual machine (VM) and can't really install via the usual methods. It is also possible to do it on TemplateVMs but that is a bit more involved -- let's leave that as homework.

To do this you click on the "start menu" and open the Create new qube application. Here you change the following:

• Name: we're calling it develop, but you can name it whatever you want
• Type: Standalone qube copied from a template
• Template: based on the previous step you either choose fedora or debian
• Launch settings after creation: tick this for the next step

Then the qube settings window will pop up. Here we'll increase the Private storage max. size to 20G. This is basically the size of your home folder (where you'll keep all of your stuff). But you can always increase this later by going to the qube's settings.

After this, hit OK.

3. Installing the software

> Note: Now this part will change a bit depending on whether or not you have fedora or debian.

Firstly, copy your download to the develop qube (or the name you gave it). If you don't know how to do this, check:

https://www.qubes-os.org/doc/copying-files/

Then you open the terminal application on the develop qube and depending on your choice you go either route:

If on Fedora StandaloneVM

When you moved the file to the StandaloneVM, it landed on the folder ~/QubesIncoming/<SOME_VM>/<FILE>.rpm. So in our case we ran on the terminal:

sudo dnf install ~/QubesIncoming/disp3741/local-5.9.9-linux.rpm

Skip now the Debian part by going to step 4.

If on Debian StandaloneVM

When you moved the file to the StandaloneVM, it landed on the folder ~/QubesIncoming/<SOME_VM>/<FILE>.deb. So in our case we ran on the terminal:

sudo apt install ~/QubesIncoming/disp3741/local-5.9.9-linux.deb

> Note if you see some errors like the following, feel free to ignore it (see why here) > /home/user/QubesIncoming/<SOME_VM>/<FILE>.deb’ couldn’t be accessed by user ‘_aptsudo apt install``

4. Adding shortcut to start menu

Now the application should be installed but it won't show up in the application's menu. To add it, open the qube settings for the develop qube (the app should be named <QUBE_NAME>: Qube Settings). Then open the tab.

You'll want to add your application's name to the right column. If you don't see it, click on Refresh Applications button. That will take a couple of seconds but afterwards it should show up.

> Still don't see it? > If after refreshing your applications, your newly installed application doesn't show up it might be that your .deb or .rpm didn't include a shortcut (which sucks). If this is the case read here to try to salvage the situation.

Move you newly installed to the right column and hit OK. As you can see on the following picture, the Local application is selected.

Then you should see a shortcut for this application on your "start menu" under the develop qube.

For more information on this step, consult the docs.

5. You're done! :partying_face:

Now, all you have to do is open the application!

6. Update it!

Now, because you installed it manually, whenever there is an update for this application you'll have to remember to update it by repeating this exact process with the new version.

You'll remember to do this, right?! ;)