Introduction

This guide is for users who want to let a qube access some specific websites, but not the entire Internet. It’s especially useful when using the Qubes firewall isn’t enough — for example, when websites change their IPs often, making domain-based rules unreliable.

⚠️ This guide assumes you know what an HTTP(S) proxy is, and that you're comfortable using the terminal to run commands or edit files.

The setup will create a sys-proxy-out qube that filters access to a list of allowed domains. It uses qvm-connect-tcp so that other qubes can use this proxy, even if they don’t have a NetVM. That way, those qubes can reach only the websites you’ve allowed — nothing more.

I based it on debian 12 xfce, so it's easy to set up and will be supported long term.

Use case

• an offline qube that need to reach a particular website
• a web browsing qube restricted to a list of websites
• mix multiple netvm / VPNs into a single qube

Setup the template

• Install debian-12-xfce template
• Make a clone of it, let's call it debian-12-xfce-squid
• Start the qube and open a terminal
• Type sudo apt install -y squid
• Type sudo systemctl disable squid
• Delete and replace /etc/squid/squid.conf with this content (the default file is not suitable at all)

acl localnet src 127.0.0.1/32

acl SSL_ports port 443
acl Safe_ports port 80
acl Safe_ports port 443

http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports

acl permit_list dstdomain '/rw/config/domains.txt'
http_access allow localnet permit_list

http_port 3128

cache deny all
logfile_rotate 0
coredump_dir /var/spool/squid

The configuration file only allows the proxy to be used for ports 80 and 443, and disables cache (which would only apply to port 80).

Close the template, you are done with it.

Setup an out proxy qube

This step could be repeated multiple times, if you want to have multiple proxies with different lists of domains.

• Create a new qube, let's call it sys-proxy-out, based on the template you configured above (debian-12-xfce-squid in the example)
• Configure its firewall to allow the destination * and port TCP 443, and also * and port TCP 80 (this covers basic needs for doing http/https). This is an extra safety to be sure the proxy will not use another port.

• Start the qube

• Add this line to /rw/config/rc.local: systemctl start squid

• Configure the domain list in /rw/config/domains.txt with this format:

# for a single domain
domain.example

# for all direct subdomains of qubes.org including qubes.org
# this work for doc.qubes-os.org for instance, but not foo.doc.qubes-os.org
.qubes-os.org

ℹ️ If you change the file, reload with sudo systemctl reload squid. You should read that it's active, and that there are no error in the log lines.

⚠️ If you have a line with a domain included by another line, squid will not start as it considers it an error! For instance .qubes.org includes doc.qubes-os.org.

ℹ️ If you want to check if squid started correctly, type systemctl status squid.

⚠️ As far as I know, it is only possible to allow a hostname or a wildcard of this hostname, so you at least need to know the depth of the hostname. If you want to allow anything.anylevel.domain.com, you could use dstdom_regex instead of dstdomain, but it seems a regular source of configuration problems, and should not be useful for most users.

In dom0, edit the file /etc/qubes/policy.d/50-squid.policy with this content:

qubes.ConnectTCP +3128 MyQube @default allow target=sys-proxy-out
qubes.ConnectTCP +3128 MyQube2 @default allow target=sys-proxy-out

This will allow qubes MyQube and MyQube2 to use the proxy from sys-proxy-out. Adapt to your needs here. 👍

How to use the proxy

Now the proxy is set up, and MyQube is allowed to use it, a few more things are required:

• Start qube MyQube
• Edit /rw/config/rc.local to add qvm-connect-tcp ::3128
• Configure http(s) clients to use localhost:3128 as a proxy

It's possible to define the proxy user wide, this should be picked by all running programs, using this:

mkdir -p /home/user/.config/environment.d/
cat <<EOF >/home/user/.config/environment.d/proxy.conf
all_proxy=http://127.0.0.1:3128/
EOF

Congratulations on reaching this line!

Going further

Using a disposable qube for the proxy

The sys-proxy-out could be a disposable. In order to proceed:

• mark sys-proxy-out as a disposable template in its settings
• create a new disposable qube using sys-proxy-out as a template
• adapt the dom0 rule to have the new disposable qube name in the target field

Checking logs

In the proxy qube, you can check all requests done in /var/log/squid/access.log, you can filter with grep TCP_DENIED to see denied requests, this can be useful to adapt the domain list.

Test the proxy

Check allowed domains are reachable

From the http(s) client qube, you can try this command to see if the proxy is working:

curl -x http://localhost:3128 https://a_domain_you_allowed/

If the output is not curl: (56) CONNECT tunnel failed, response 403 then it's working.

Check non-allowed domains are denied

Use the same command as above, but with a domain you did not allow

curl -x http://localhost:3128 https://a_domain_you_allowed/

The output should be curl: (56) CONNECT tunnel failed, response 403.

Verify nothing is getting cached

In the qube sys-proxy-out, inspect /var/spool/squid/, it should be empty. If not, please report here, this should not happen.

Some logs file exist in /var/log/squid/, if you don't want any hints about queried domains, configure squid accordingly. Privacy-specific tweaks are beyond the scope of this guide.